Features:
- Wireless control, easy to install
- Waterproof case
- With high power of 30A
- Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V.
- You can rotate the motor in or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors doors.
- One/several transmitters can control one/several receivers simultaneously.
- If you use two or more receivers in the same place, you can set them with different codes.
- Transmitting Frequency: 433MHz
Receiver:
- Model No: S1PF3-DC12 / S1PF3-DC24
- Coding Type: Fixed code or learning code
- Coding Setting: By learning
- Power Supply (Operating Voltage): DC12V±1V (S1PF3-DC12), DC24V±1V (S1PF3-DC24)
- Output: DC12V (S1PF3-DC12), DC24V (S1PF3-DC24)
- Case Size: 100mm x 67mm x 39mm
- Quiescent Current: 5mA
- Rated Current: 15A
- The Maximum Instantaneous Current of Starting Motor: 30A
Transmitter:
- Model No.: 0021029 (CB-12)
- Channel: 12 CH
- Remote Control Distance: 1000m / 3000ft (theoretically)
- Encode: Fixed code by soldering
- Unit size: 135mm x 42mm x 25mm
- Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)
Usage:
- Connect power supply DC12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”. You can exchange the output wires of motor to change the rotating direction of motor.
- Setting control mode Interlocking: Connect JP1
- Press button ▲ on remote: terminal “Output” outputs DC power, rotates in direction.
- Press button ▼ on remote: terminal “Output” outputs DC power, rotates in reversal direction.
- Press button stop on remote: motor stops.
- of manual buttons in :
- Press button K3 in : terminal “Output” outputs DC power, rotates in direction.
- Press button K1 in : terminal “Output” outputs DC power, rotates in reversal direction.
- Press button K2 in : motor stops.
- Setting control mode Momentary: Connect JP2
- Press and hold ▲ on remote: terminal “Output” outputs DC power, rotates in positive direction. Release button: motor stops.
- Press and hold ▼ on remote: terminal “Output” outputs DC power, rotates in reversal direction. Release button: motor stops.
- of manual buttons in :
- Press and hold button K3 in : terminal “Output” outputs DC power, rotates in direction. Release button: motor stops.
- Press and hold button K1 in : terminal “Output” outputs DC power, rotates in reversal direction. Release button: motor stops.
- Setting control mode Momentary: Connect Jumper S2
Restrictive function:
- You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will rotate; if the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the motor will rotate in direction; when the restrictive switch “X1” is disconnected, will stop automatically. When the restrictive switch “X2” is connected, the motor will rotate in reversal direction; when the restrictive switch “X2” is disconnected, will stop automatically.
Note:
- Before you change from motor rotates in positive direction to reversal direction or from motor rotates in reversal direction to direction, you should stop rotating of motor firstly, then remote control motor.