Log in Sign up
Cart (0)
2 CH Waterproof Wireless Remote Switch For Two Linear Actuators

2 CH Waterproof Wireless Remote Switch For Two Linear Actuators (Model 0020604)

$104.00

Shipping calculated at checkout.

  • Wireless control, easy to install
  • Waterproof case 
  • With power of 30A
  • Control DC motors of rolling , projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V/24V.
  • You can rotate the motor in  or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors  doors.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 433MHz

Receiver:
  • Model No: S1PF3-DC12 / S1PF3-DC24
  • Coding Type: Fixed code or learning code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC12V±1V (S1PF3-DC12), DC24V±1V (S1PF3-DC24)
  • Output: DC12V±1V (S1PF3-DC12), DC24V±1V (S1PF3-DC24)
  • Case Size: 100mm x 67mm x 39mm
  • Quiescent Current: 5mA
  • Rated Current: 15A
  • The Maximum Instantaneous Current of Starting Motor: 30A

Transmitter:
  • Model No.: 0021052(CV-6-2)
  • Channel: 6 CH 
  • Remote Control Distance: 500m / 1500ft (theoretically) 
  • Encode: Fixed code by Soldering 
  • Unit size: 110mm x 50mm x 18mm 
  • Power Supply: 1 x 23A -12V battery (Included, can be used for 12 months)

Usage:
  • Power supply:
  • Connect power supply DC12V / 24V to terminal “INPUT”; connect  to terminal “OUTPUT”. You can exchange the output wires of  to change the rotating direction of .

  • Setting control mode Interlocking: Connect JP1
  •  of :
  • Press button ▲ on remote: terminal “Output” outputs DC power,  rotates in  direction.
  • Press button ▼ on remote: terminal “Output” outputs DC power,  rotates in reversal direction.
  • Press  remote: motor stops.
  •  of manual buttons in :
  • Press button K3 in : terminal “Output” outputs DC power,  rotates in  direction.
  • Press button K1 in : terminal “Output” outputs DC power,  rotates in reversal direction.
  • Press button K2 in : motor stops.

  • Setting control mode Momentary: Connect JP2
  •  of :
  • Press and hold  ▲ on remote: terminal “Output” outputs DC power,  rotates in  direction. Release button: motor stops.
  • Press and hold  ▼ on remote: terminal “Output” outputs DC power,  rotates in reversal direction. Release button: motor stops.
  •  of manual buttons in :
  • Press and hold button K3 in : terminal “Output” outputs DC power,  rotates in  direction. Release button: motor stops.
  • Press and hold button K1 in : terminal “Output” outputs DC power,  rotates in reversal direction. Release button: motor stops.

Restrictive function:
  • You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will rotate; if the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the motor will rotate in  direction; when the restrictive switch “X1” is disconnected,  will stop automatically. When the restrictive switch “X2” is connected, the motor will rotate in reversal direction; when the restrictive switch “X2” is disconnected,  will stop automatically.

Note: 
  • Before you change from motor rotates in positive direction to reversal direction or from motor rotates in reversal direction to  direction, you should stop rotating of motor firstly, then remote control motor.