Each linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator.
This flat plate bracket is used to mount vertically on the bottom of the linear actuator F .
Includes a flat plate bracket, a M27 nut, a silver M8 screw and 6 black M4 screws.
Iron material.
Size: 180 x 80 x 10 mm (7.1 x 3.1 x 0.4 inches)
Diameter of the four outer mounting holes: 9mm [0.354 in]
Diameter of the six inner mounting holes: 4.5mm [0.177 in]
Diameter of the middle small mounting hole: 15.5mm [0.610 in]
Diameter of the middle large mounting hole: 44.5mm [1.752 in]
weight: 1000g
Note:
This flat plate bracket needs to be ordered together with the linear actuator F.
If you order them together, we will flatten the mounting hole part of the rear connector of linear actuator F by using the milling machine, and customize the rear connector of the linear actuator F into the style with M27 external threads, and then fix this flat plate bracket to the bottom of linear actuator with an M27 nut, an M8 screw, and six M4 screws.
This installation process can only be completed by our factory, so if you purchase this flat plate bracket separately, you will not be able to complete the installation.